Title
(R1850, Revised March 2023)
File
Publication File:
Summary
Brine, or produced water, is a byproduct of oil and gas production. It consists of water from the geologic formation, injection water, oil and salts. Brine has a high salt concentration the ions of the salts negatively affect the site's soil and vegetation, impairing its ability to produce crops and forage. the goal of brine spill remediation is to remove or minimize salts in the soil.
Lead Author
Lead Author:
Miranda Meehan, Extension Livestock Environmental Stewardship Specialist
Other Authors
Thomas DeSutter, Soil Scientist, NDSU School of Natural Resource Sciences
Kevin Sedivec, Extension Rangeland Management Specialist
Chris Augustin, Extension Area Soil Health Specialist
Annalie Peterson, Graduate Research Assistant, Soil Science
Availability
Availability:
Web only
Publication Sections
Table of Contents
What is Brine?
Brine Effects on Soil
Brine Effects on Vegetation
Brine Spill Remediation
Remediation Results
Citations
Brine is a direct by-product of the oil and gas industry that is brought to the surface during the extraction of oil and gas. A higher quantity of brine will need to be stored, transported and disposed of as the result of increased energy development. These larger quantities can lead to greater risks for spills. Brine spills negatively affect the soil and vegetation, impairing their ability to produce crops and forage (Figure 1).
Figure 1.This is a 50-year-old brine spill in northwestern North Dakota.
Photo Credit:
Aaron Daigh, NDSU
What is Brine?
Brine, or produced water, is a byproduct of oil and gas production. It consists of water from the geologic formation, injection water, oil and salts. To learn more about how brine is formed refer to NDSU Extension publication WQ2083 Origination of Produced Water (Brine) in the Williston Basin.
Brine has a high salt concentration that has been recorded up to four times the salinity of ocean water. Brine solutions can have electrical conductivities (EC) in excess of 200 deciSiemens per meter (dS/m; 1 dS/m = 1 millimho per centimeter [mmho/cm]), sodium adsorption ratios (SAR) of more than 300 and total dissolved solids (TDS) concentrations of 100,000 parts per million.
The high salt concentrations in brine come from salt deposits in oil-producing rock formations containing oil, as seen in the Bakken and Three Forks formations in western North Dakota. However, the overall salinity and concentrations of sodium can vary widely by location and depth of extraction.
Figure 2.The average well in North Dakota, depending on the field, location and the age of the well, the oil:brine ratios in the Williston Basin (Bakken and Three Forks formations) range from 2:1 to 1:4, whereas in older formations where enhanced recovery is being used, this ratio can be 1:2 to as much as 1:100 (communications with various oil and gas professionals).
Brine Effects on Soil
The salts in brine alter the chemical and physical properties of soils. Due to the high amounts of soluble salts (predominately sodium chloride, NaCl), brine negatively impacts soils in many ways.
Chloride levels in and around the spill area are toxic to many biological species. Sodium is a natural dispersant and can cause soils to swell and disperse, but only if the total salt level in the soil falls below a flocculation threshold limit. A flocculant, such as calcium, binds the soil together and helps create soil structure.
For most soils in the region, when the SAR from a saturated paste extract (assume that at values of less than 50, the SAR ≈ exchangeable sodium percentage (ESP) ≈ % sodium) is 5 or more and the EC of the saturated paste is 2 dS/m or less, soils will swell and/or disperse (Figure 3). Thus, remediation strategies should focus on reducing the concentration of sodium (a known dispersant), increasing the concentration of calcium (a known flocculant), and maintaining EC levels above the threshold at which swelling and dispersion will occur.
Swelling soils will retain their natural structure, but soil structure will be lost once dispersion occurs. This loss of structure impedes the ability of water to infiltrate and move through the soil, increasing the potential for erosion.
Figure 3.Soil EC and sodium impact the structure of soils when swelling and dispersion occur, which impedes the ability of water to infiltrate through the soil.
Brine Effects on Vegetation
Salts from brine impair plants’ ability to take up water and nutrients. High salt concentrations in the soil restrict the plants’ ability to take up water despite adequate water being available in the soil. This causes the plant to exhibit symptoms of drought due to an osmotic effect, which causes water to move from areas of low salt concentrations to areas of high salt concentrations (Figure 4).
Figure 4.Effects of brine on vegetation.
Due to the impacts of high salt concentrations on soil and vegetation, impacted sites suffer from a decline in plant growth. This is magnified by the inability of many seeds to germinate in highly saline soils. Under these conditions, seeds have difficulty taking up water, causing damage to the embryo or dormancy in response to water stress.
In addition to the inability to take up water, nutrient uptake is also reduced. Excess sodium and chloride ions can interfere with the plants’ ability to generate energy and reduce the uptake and/or use of key nutrients. Excess sodium and chloride can be toxic to plants.
Plants exposed to brine often die due to salt stress resulting from the inability to take up water and key nutrients. Most plants will show signs of salt stress if sodium exceeds 70 milligrams per liter in water, 5% in plant tissue or 230 milligrams per liter in soil (saturated paste extract).
Chloride negatively impacts most plants when it exceeds 350 milligrams per liter in water, 1% in plant tissue or 250 milligrams per liter in soil (saturated paste extract). However, some plant species are salt-tolerant; they are called halophytes.
Halophytes are able to grow and reproduce in soils with EC values of 20 dS/m or more. In comparison, EC values above 2 dS/m negatively affect the growth of many row crops and small grains. Halophyte plants are able to survive due to adaptations that allow them to regulate, transport or store salts safely in specialized compartments of the plants’ tissues.
Table 1.Relative Saline Tolerance Levels (EC) of Agronomic Crops1,2,3.
Crop | EC (dS/m) Production Affected – Seeding Stage | EC (dS/m) Production Affected | Upper Limit | Tolerance Rating |
---|---|---|---|---|
Canola | 10 | 14 | High | |
Barley | 24 | 8 | 16 | High |
Wheat (durum) | 7 | 14 | Moderate | |
Wheat (semidwarf) | 7 | 14 | Moderate | |
Sugar beets | 8 | 7 | 14 | Moderate |
Sunflowers | 8 | 6 | 14 | Moderate |
Safflowers | 8 | 6 | 10 | Moderate |
Oats | 4 | 8 | Low | |
Soybeans | 4 | 8 | Low | |
Alfalfa | 4 | 8 | Low | |
Corn | 3 | 6 | Low | |
Flax | 2 | 4 | Low | |
Edible beans | 1 | 2 | Low |
1Source: Ogle and St. John (2009).
2Source: Franzen (2013).
3Source: Green et al. 2020
Table 2.Relative Saline Tolerance Levels (EC) of Selected Range and Pasture Species1, 2.
EC (dS/m) Production Affected – Seedling Stage | EC (dS/m) Production Affected – Vegetative Stage | Upper Limit | Tolerance Rating | Palatability | |
---|---|---|---|---|---|
Grass | |||||
Nuttall’s alkaligrass | 8 | 14 | 32 | Very high | Medium |
Inland saltgrass | 12 | 16 | 32 | Very high | Medium |
Alkali sacaton | 10 | 32 | 32 | Very high | Medium |
Beardless wildrye | 8 | 13 | 26 | Very high | Medium |
Tall wheatgrass | 13 | 26 | Very high | Low | |
Green wheatgrass (Newhy) | 32 | 13 | 26 | Very high | High |
Russian wildrye | 13 | 24 | Very high | Medium | |
Alkali cordgrass | 12 | 24 | Very high | – | |
Prairie cordgrass | 10 | 15 | Moderate | Low | |
Alkali bluegrass | 12 | 24 | Very high | – | |
Slender wheatgrass | 16 | 10 | 22 | Very high | Medium |
Altai wildrye | 10 | 20 | Very high | Medium | |
Plains bluegrass | 10 | 20 | Very high | Medium | |
Tall fescue | 8 | 18 | High | Medium | |
Western wheatgrass | 24 | 8 | 16 | High | High |
Crested wheatgrass | 6 | 14 | Moderate | High | |
Intermediate wheatgrass | 6 | 12 | Moderate | High | |
Little bluestem | 6 | 6 | 10 | Moderate | Medium |
Smooth brome | 5 | 10 | Moderate | Highest | |
Meadow brome | 4 | 10 | Moderate | Highest | |
Switchgrass | 16 | – | 6 | Low | Medium |
Blue grama | 4 | 4 | 6 | Low | Highest |
Forbs and Shrubs | |||||
Forage kochia | 10 | 18+ | High | Medium | |
Fourwing saltbush | 10 | 18+ | High | Medium | |
Winterfat | 10 | 18+ | High | High | |
Strawberry clover | 6 | 16 | High | Highest | |
Yellow sweetclover | 5 | 10 | Moderate | High | |
Cicer milkvetch | 4 | 10 | Moderate | Highest | |
Birdsfoot trefoil | 5 | 8 | Low | High | |
Alfalfa | 4 | 8 | Low | Highest | |
Clovers (red, alsike, ladino) | 3 | 4 | Low | Highest |
1Source: Ogle and St. John (2009).
2Source: Thomlinson, H. (2016).
3Source: Green et al. 2020
4Source: Wallace 2019
Brine Spill Remediation
When brine spills occur, there is a need to remove the excess chloride to prevent contamination of surface and groundwaters and also to reduce sodium to limit its impact on soil structure. The ultimate goal of brine spill remediation is to remove or minimize salts in the soil, allowing for improved vegetation growth and establishment. Remediation can be accomplished throughex situorin situmethods.
Ex Situ Remediation
Ex situmethods are most often utilized in North Dakota. Duringex situremediation, the topsoil or impacted depth is excavated from the site and moved to a landfill that is approved for the containment of oil-field wastes. New soil is brought in to replace the removed soil.
The new topsoil may have different chemical and physical properties, including a different seedbank, than the original soils. The new soil will not be contaminated with brine and it should be managed to maintain a clean, weed-free seedbed for the reclamation process.
Photo Credit:
Aaron Daigh, NDSU
Figure 5. A crew is doing ex situ remediation of a brine spill.
In Situ Remediation
In situmethods remove the salts from the topsoil while keeping the soil in place. The most common methods include the application of chemical amendments, which can be supplemented with tile drainage.
Calcium-based amendments are used to replace sodium on the soil’s exchange sites, reducing soil swelling and dispersion and allowing the sodium to be leached lower in the soil profile, where it does not impact plant growth and establishment. There is then a reduced risk of sodium redepositing near the surface again.
Chemical amendments are typically calcium-based, such as gypsum. Gypsum is the most commonly applied amendment used forin situremediation in North Dakota.
However, the use of gypsum has limitations because it is only effective to the depth to which it is incorporated into the soil. In addition, the particle size of the gypsum being applied can influence reclamation. Smaller gypsum particles have greater surface area, causing it to react more quickly than larger particles.
Alternatively, calcium acetate, which is more soluble than gypsum, has been shown to be an effective Ca-amendment in replacement or used in conjunction with gypsum.
The use of tile drainage aids in permanently removing the leached waters containing sodium and chloride to offsite disposal areas. However, one of the main limitations to successful remediation is applying enough water to 1) solubilize the calcium amendment that can counteract the negative effects of the sodium, and to maintain soil EC; 2) move calcium through the soil profile; and 3) leach the sodium and chloride into the tile and collection tanks, or below the rooting zone.
The success ofin situremediation can be enhanced through the establishment of halophytic vegetation. Halophytes take up salts and store them in plant parts. Harvesting the above-ground biomass and removing it from the site can reduce salts in the soil.
Photo Credit:
Chris Augustin, NDSU
Figure 6. The topsoil was removed from this spill site as part of ex situ remediation.
Remediation Results
Remediation is a long and costly process, often with varied success. However, new research and technologies have improved the success of remediation projects greatly. Important factors to consider when tackling a remediation project include:
- who is responsible for cleaning up the spill
- the extent of the impacted area
- the soil EC and SAR levels
- estimated cost of cleanup
- the desired land use
Answering these questions will help you determine the method(s) best suited for a brine impacted site.
Following any remediation project, continuous monitoring of the site to document the success of the project is important. Pay close attention to soil structure, EC and SAR levels, and vegetation cover and production.
Citations
Energy and Environmental Research Center. 2016. North Dakota Remediation Resource Manual. University of North Dakota, Energy and Environmental Research Center, Grand Forks, N.D. 116 pp.
Franzen, D. 2013. Managing saline soils in North Dakota. Pub. SF1087 (Rev.), North Dakota State University Extension Service, Fargo. 12 pp.
Green, A.W., M.M. Meehan and T.M. DeSutter. 2020. Seed germination of selected crop and graminoid species in response to treatment with sodium chloride and oil-field brine solutions. Can. J. Plant Sci. 100:495-503.
Ogle, D., and L. St. John. 2009. Plants for saline to sodic soil conditions: TN Plant Materials No. 9A (Rev.). USDA, NRCS, October 2009.
Tanji, K.K., L. Rollins, P. Suyama and C. Farris. 2007. Salinity management guide. WateReuse Foundation, Alexandria, Va.
Thomlinson, H. 2016. Brine impacted soils in semiarid rangelands: greenhouse ED thresholds and ex situ/in situ remediation comparisons. North Dakota State University [MS thesis].
Wallace, C. 2019. Riparian graminoid species responses and productivity in compromised environmental and soil conditions. North Dakota State University [MS thesis].
Funding for this publication was provided by USDA, NIFA Critical Agriculture Research and Extension Award 2016-69008-25092.
The NDSU Extension Service does not endorse commercial products or companies even though reference may be made to tradenames, trademarks or service names.
NDSU encourages you to use and share this content, but please do so under the conditions of our Creative Commons license. You may copy, distribute, transmit and adapt this work as long as you give full attribution, don’t use the work for commercial purposes and share your resulting work similarly. For more information, visit www.ag.ndsu.edu/agcomm/creative-commons.
For more information on this and other topics, see www.ag.ndsu.edu
County commissions, North Dakota State University and U.S. Department of Agriculture cooperating. NDSU does not discriminate in its programs and activities on the basis of age, color, gender expression/identity, genetic information, marital status, national origin, participation in lawful off-campus activity, physical or mental disability, pregnancy, public assistance status, race, religion, sex, sexual orientation, spousal relationship to current employee, or veteran status, as applicable. Direct inquiries to Vice Provost for Title IX/ADA Coordinator, Old Main 201, NDSU Main Campus, 701-231-7708, ndsu.eoaa@ndsu.edu. This publication will be made available in alternative formats for people with disabilities upon request, 701-231-7881.