Lawry's® Taco Seasoning Mix | Lawry's (2024)

Allergen Statement

For the most updated allergen and nutritional information, it is important that you read the ingredient statement printed on the packaging at the time of your purchase.

We understand the seriousness of food allergies and sensitivities and will always declare these ingredients on our label in the ingredient statement - they will never be hidden under the notations of "spices" or "natural flavors":

  • Wheat
  • Milk & Milk Products
  • Peanuts
  • Tree Nuts
  • Egg
  • Monosodium Glutamate or MSG
  • Soy
  • Shellfish
  • Sesame (for US products made beginning January 2023)
  • Fish
  • Yellow Dye #5 (Tartrazine)
  • Sulfites over 10 ppm
  • Gluten containing grains - including barley, rye, oats, spelt, triticale, and kamut

If no ingredient statement appears on the product label, then the products is as it appears in the product name (e.g. black pepper). This labeling policy is compliant with US or Canadian food labeling laws, as appropriate. All our retail Extracts and Food Colors are formulated without gluten.

If any product has a Gluten Free claim, the product and the manufacturing line has been validated Gluten Free.

Our facilities have allergen, sanitation, and hygiene programs in place. Our employees follow good manufacturing practices and are trained in the importance of correct labeling and the necessity of performing thorough equipment clean-up and change over procedures to minimize cross-contact of ingredients.

Again, we encourage you to read the ingredients statement on your package at the time of purchase to ensure accurate, up to date information.

Lawry's® Taco Seasoning Mix | Lawry's (2024)

FAQs

How to use Lawry's taco seasoning? ›

INSTRUCTIONS
  1. 1 Brown ground meat in large skillet on medium-high heat. Drain fat, if desired.
  2. 2 Stir in Taco or Hot Taco Spices & Seasonings and water. Bring to boil, stirring occasionally. Reduce heat to low. ...
  3. 3 Spoon meat mixture into taco shells. Serve with assorted toppings.

What can I use if I don't have enough taco seasoning? ›

Packet Taco Seasoning replacement: if you only want to make enough taco seasoning to replace 1 packet, use the following amounts:
  1. 1 tablespoon chili powder.
  2. ¼ teaspoon garlic powder.
  3. ¼ teaspoon onion powder.
  4. Pinch of cayenne pepper.
  5. ¼ teaspoon dried oregano.
  6. ½ teaspoon paprika.
  7. 1 ½ teaspoons ground cumin.
  8. 1 teaspoon salt.
Mar 16, 2021

What are the ingredients in Lawry's taco seasoning? ›

Ingredients. Spices (Including Paprika, Cumin, Oregano, Chili Pepper), Onion, Salt, Lactose (Milk), Sugar, Garlic, Enriched Wheat Flour (Flour, Niacin, Iron, Thiamine Mononitrate, Riboflavin, Folic Acid), Cocoa Powder Processed with Alkali and Natural Flavor.

How many tablespoons in a packet of taco seasoning mix? ›

How many tablespoons are in a packet of taco seasoning? If you've been used to using one packet of taco seasoning per 1 pound of meat, then you might have this question. There's typically 3 tablespoons (sometimes 4 tablespoons depending in the brand) in a store-bought packet of taco seasoning.

How do you use Lawry's seasoning? ›

Shake on beef, pork or poultry before and after cooking. Mix into ground beef for bold burgers. Add to fries and baked or mashed potatoes. Sprinkle on eggs, salads, vegetables, soups…the possibilities are endless!

Do you add water before taco seasoning? ›

1/2 cup water: After you've browned your meat, add in 1/2 cup water with 3 tablespoons of the taco seasoning mix. Stir to combine and mix all together. Slowly add in another 1/2 cup water as some will begin to absorb – you want it with a little sauce, just not too watery!

How much taco seasoning for 1 pound of meat? ›

To use: Use about 2 tablespoons of the taco seasoning for every 1 pound of meat. Use more or less depending on your preference. Brown meat and drain the fat. Add your taco seasoning along with about 1/2 cup of water.

How much seasoning per pound of meat? ›

At the very least, you should add about one tablespoon of meat seasoning for every pound of meat. Apply the dry rub evenly so that every mouth has flavor.

How to use taco seasoning mix? ›

Prep Instructions
  1. Cook beef in 10-inch skillet over medium-high heat 6 to 7 minutes, breaking up and stirring; drain.
  2. Stir in water and Seasoning Mix; heat to boiling.
  3. Reduce heat; simmer uncovered 3 to 4 minutes, stirring often, until thickened. Ratings and Reviews. Reviews. Rating Snapshot.

Is Lawry's seasoning high in sodium? ›

Lawry's® Seasoned Salt brings savory, signature flavor and the ultimate in versatility to any chef-inspired recipe: • Lawry's Seasoned Salt is made with a perfect blend of paprika, celery, turmeric, garlic, salt and other spices with 35% less sodium than regular table salt.

Does Lawry's Taco seasoning have MSG? ›

Lawry's Taco Seasoning Mix is kosher with no added MSG, artificial flavors or colors from artificial sources authentic flavor.

Is there MSG in Lawry's? ›

Lawry's Seasoned Salt is kosher and made with no added MSG, artificial flavors or colors from artificial sources. Since 1938, Lawry's has been committed to providing flavor solutions to help chefs stay on top of menu trends and consumer preferences, while adding sensational flavor across the whole menu.

How much is in one packet of taco seasoning? ›

Different commercial brands package their taco seasonings in different amounts, but most packets contain about 1 ounce or 3 tablespoons of product. Use 3 tablespoons of homemade taco seasoning for every packet your recipe calls for.

What can I use if I don't have taco seasoning? ›

Combine chili powder, paprika, onion powder, sea salt, garlic powder, cumin, oregano, black pepper, cayenne pepper, and red pepper flakes in a bowl; mix well. Enjoy!

How much seasoning do I use? ›

The Rules. Remember the ½ Rule - Start off with 1/2 teaspoon of spice for any dish that serves four to six people. And for herbs, use 1/2 teaspoon for powders and 1-1/2 teaspoon for dried or chopped.

Do you put taco seasoning on meat before or after? ›

Cook, stirring, until browned. Remove from heat, rinse meat with hot water, and drain water and grease from beef. Return meat to skillet, and pour in seasoning.

How do you use taco seasoning mix? ›

Prep Instructions
  1. Cook beef in 10-inch skillet over medium-high heat 6 to 7 minutes, breaking up and stirring; drain.
  2. Stir in water and Seasoning Mix; heat to boiling.
  3. Reduce heat; simmer uncovered 3 to 4 minutes, stirring often, until thickened. Ratings and Reviews. Reviews. Rating Snapshot.

Can you put Lawry's seasoning on fries? ›

Simply use in place of salt and lightly sprinkle Lawry's French Fry Seasoning over freshly cooked french fries and serve.

Top Articles
Latest Posts
Article information

Author: Ray Christiansen

Last Updated:

Views: 5952

Rating: 4.9 / 5 (49 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Ray Christiansen

Birthday: 1998-05-04

Address: Apt. 814 34339 Sauer Islands, Hirtheville, GA 02446-8771

Phone: +337636892828

Job: Lead Hospitality Designer

Hobby: Urban exploration, Tai chi, Lockpicking, Fashion, Gunsmithing, Pottery, Geocaching

Introduction: My name is Ray Christiansen, I am a fair, good, cute, gentle, vast, glamorous, excited person who loves writing and wants to share my knowledge and understanding with you.